SPSolve ProductionPractical production help from Lancing UK
Start with the problem you can see

Automation

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably. Choose the product, pack or process that most closely matches the fault.

197products and processes
10production areas
7checks to make
61machinery routes
Production issue relating to automation
Liquid filling

24 questions

Production process relating to thin free-flowing liquidsLiquid filling

When should I automate thin free-flowing liquids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to foamy liquidsLiquid filling

When should I automate foamy liquids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to viscous liquidsLiquid filling

When should I automate viscous liquids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to abrasive liquidsLiquid filling

When should I automate abrasive liquids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to corrosive liquidsLiquid filling

When should I automate corrosive liquids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to flammable liquidsLiquid filling

When should I automate flammable liquids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to carbonated drinksLiquid filling

When should I automate carbonated drinks?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to water and still drinksLiquid filling

When should I automate water and still drinks?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to oils and lubricantsLiquid filling

When should I automate oils and lubricants?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to sauces and dressingsLiquid filling

When should I automate sauces and dressings?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to creams and lotionsLiquid filling

When should I automate creams and lotions?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to gels and pastesLiquid filling

When should I automate gels and pastes?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to syrups and honeyLiquid filling

When should I automate syrups and honey?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to paints and coatingsLiquid filling

When should I automate paints and coatings?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to adhesives and sealantsLiquid filling

When should I automate adhesives and sealants?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to cleaning chemicalsLiquid filling

When should I automate cleaning chemicals?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to solventsLiquid filling

When should I automate solvents?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to alcohol-based productsLiquid filling

When should I automate alcohol-based products?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to dairy liquidsLiquid filling

When should I automate dairy liquids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to hot-fill productsLiquid filling

When should I automate hot-fill products?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to liquids with particlesLiquid filling

When should I automate liquids with particles?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to high-value liquidsLiquid filling

When should I automate high-value liquids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to large-volume jerrycansLiquid filling

When should I automate large-volume jerrycans?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to small-dose liquidsLiquid filling

When should I automate small-dose liquids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Powders, granules and pieces

23 questions

Production process relating to fine powdersPowders, granules and pieces

When should I automate fine powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to free-flowing powdersPowders, granules and pieces

When should I automate free-flowing powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to cohesive powdersPowders, granules and pieces

When should I automate cohesive powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to dusty powdersPowders, granules and pieces

When should I automate dusty powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to aerated powdersPowders, granules and pieces

When should I automate aerated powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to hygroscopic powdersPowders, granules and pieces

When should I automate hygroscopic powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to abrasive powdersPowders, granules and pieces

When should I automate abrasive powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to pharmaceutical powdersPowders, granules and pieces

When should I automate pharmaceutical powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to food powdersPowders, granules and pieces

When should I automate food powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to protein powdersPowders, granules and pieces

When should I automate protein powders?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to flour and starchPowders, granules and pieces

When should I automate flour and starch?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to spices and seasoningsPowders, granules and pieces

When should I automate spices and seasonings?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to coffee and teaPowders, granules and pieces

When should I automate coffee and tea?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to sugar and saltPowders, granules and pieces

When should I automate sugar and salt?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to seeds and grainsPowders, granules and pieces

When should I automate seeds and grains?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to pet foodPowders, granules and pieces

When should I automate pet food?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to snacks and confectioneryPowders, granules and pieces

When should I automate snacks and confectionery?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to fragile piecesPowders, granules and pieces

When should I automate fragile pieces?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to mixed-size piecesPowders, granules and pieces

When should I automate mixed-size pieces?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to granules and pelletsPowders, granules and pieces

When should I automate granules and pellets?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to tablets and capsulesPowders, granules and pieces

When should I automate tablets and capsules?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to hardware and componentsPowders, granules and pieces

When should I automate hardware and components?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to frozen piecesPowders, granules and pieces

When should I automate frozen pieces?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Capping and closures

25 questions

Production process relating to plastic screw capsCapping and closures

When should I automate plastic screw caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to metal screw capsCapping and closures

When should I automate metal screw caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to child-resistant capsCapping and closures

When should I automate child-resistant caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to tamper-evident capsCapping and closures

When should I automate tamper-evident caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to dispensing pumpsCapping and closures

When should I automate dispensing pumps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to trigger spraysCapping and closures

When should I automate trigger sprays?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to lotion pumpsCapping and closures

When should I automate lotion pumps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to dropper capsCapping and closures

When should I automate dropper caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to pipette closuresCapping and closures

When should I automate pipette closures?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to t-corks and bar topsCapping and closures

When should I automate t-corks and bar tops?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to ropp aluminium capsCapping and closures

When should I automate ropp aluminium caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to twist-off jar lidsCapping and closures

When should I automate twist-off jar lids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to vacuum lidsCapping and closures

When should I automate vacuum lids?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to press-on capsCapping and closures

When should I automate press-on caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to snap capsCapping and closures

When should I automate snap caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to flip-top capsCapping and closures

When should I automate flip-top caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to sports capsCapping and closures

When should I automate sports caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to disc-top capsCapping and closures

When should I automate disc-top caps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to nozzles and plugsCapping and closures

When should I automate nozzles and plugs?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to stoppers and bungsCapping and closures

When should I automate stoppers and bungs?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to overcapsCapping and closures

When should I automate overcaps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to caps with linersCapping and closures

When should I automate caps with liners?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to caps with dip tubesCapping and closures

When should I automate caps with dip tubes?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to large drum closuresCapping and closures

When should I automate large drum closures?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to cap feeding and sortingCapping and closures

When should I automate cap feeding and sorting?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Labelling and coding

24 questions

Production process relating to round bottle wrap labelsLabelling and coding

When should I automate round bottle wrap labels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to front and back labelsLabelling and coding

When should I automate front and back labels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to flat-surface labelsLabelling and coding

When should I automate flat-surface labels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to tapered containersLabelling and coding

When should I automate tapered containers?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to oval containersLabelling and coding

When should I automate oval containers?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to square and rectangular containersLabelling and coding

When should I automate square and rectangular containers?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to small-diameter containersLabelling and coding

When should I automate small-diameter containers?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to large containersLabelling and coding

When should I automate large containers?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to top labelsLabelling and coding

When should I automate top labels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to base labelsLabelling and coding

When should I automate base labels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to tamper bandsLabelling and coding

When should I automate tamper bands?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to shrink sleevesLabelling and coding

When should I automate shrink sleeves?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to full-body sleevesLabelling and coding

When should I automate full-body sleeves?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to print-and-apply labelsLabelling and coding

When should I automate print-and-apply labels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to shipping labelsLabelling and coding

When should I automate shipping labels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to pallet labelsLabelling and coding

When should I automate pallet labels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to date codingLabelling and coding

When should I automate date coding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to batch codingLabelling and coding

When should I automate batch coding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to barcode printingLabelling and coding

When should I automate barcode printing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to qr-code printingLabelling and coding

When should I automate qr-code printing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to thermal-transfer codingLabelling and coding

When should I automate thermal-transfer coding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to inkjet codingLabelling and coding

When should I automate inkjet coding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to label inspectionLabelling and coding

When should I automate label inspection?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to container orientationLabelling and coding

When should I automate container orientation?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Flexible packaging

18 questions

Production process relating to premade pouchesFlexible packaging

When should I automate premade pouches?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to stand-up pouchesFlexible packaging

When should I automate stand-up pouches?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to zipper pouchesFlexible packaging

When should I automate zipper pouches?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to spouted pouchesFlexible packaging

When should I automate spouted pouches?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to sachetsFlexible packaging

When should I automate sachets?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to stick packsFlexible packaging

When should I automate stick packs?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to vertical form-fill-seal bagsFlexible packaging

When should I automate vertical form-fill-seal bags?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to pillow bagsFlexible packaging

When should I automate pillow bags?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to gusset bagsFlexible packaging

When should I automate gusset bags?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to quad-seal bagsFlexible packaging

When should I automate quad-seal bags?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to flow wrapsFlexible packaging

When should I automate flow wraps?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to lidding filmFlexible packaging

When should I automate lidding film?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to vacuum packsFlexible packaging

When should I automate vacuum packs?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to modified-atmosphere packsFlexible packaging

When should I automate modified-atmosphere packs?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to tubesFlexible packaging

When should I automate tubes?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to film reelsFlexible packaging

When should I automate film reels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to heat sealsFlexible packaging

When should I automate heat seals?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to pouch opening and feedingFlexible packaging

When should I automate pouch opening and feeding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Sealing and end of line

18 questions

Production process relating to induction sealsSealing and end of line

When should I automate induction seals?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to continuous band sealingSealing and end of line

When should I automate continuous band sealing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to heat sealingSealing and end of line

When should I automate heat sealing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to l-sealingSealing and end of line

When should I automate l-sealing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to shrink tunnelsSealing and end of line

When should I automate shrink tunnels?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to sleeve wrappingSealing and end of line

When should I automate sleeve wrapping?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to case tapingSealing and end of line

When should I automate case taping?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to carton closingSealing and end of line

When should I automate carton closing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to cartoningSealing and end of line

When should I automate cartoning?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to case packingSealing and end of line

When should I automate case packing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to tray packingSealing and end of line

When should I automate tray packing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to multipackingSealing and end of line

When should I automate multipacking?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to pallet wrappingSealing and end of line

When should I automate pallet wrapping?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to palletisingSealing and end of line

When should I automate palletising?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to depalletisingSealing and end of line

When should I automate depalletising?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to checkweighingSealing and end of line

When should I automate checkweighing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to metal detectionSealing and end of line

When should I automate metal detection?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to finished-pack inspectionSealing and end of line

When should I automate finished-pack inspection?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Preparation and feeding

17 questions

Production process relating to new-bottle rinsingPreparation and feeding

When should I automate new-bottle rinsing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to returnable-bottle washingPreparation and feeding

When should I automate returnable-bottle washing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to bottle dryingPreparation and feeding

When should I automate bottle drying?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to bottle unscramblingPreparation and feeding

When should I automate bottle unscrambling?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to bottle orientationPreparation and feeding

When should I automate bottle orientation?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to bottle infeedPreparation and feeding

When should I automate bottle infeed?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to rotary tablesPreparation and feeding

When should I automate rotary tables?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to cap feedingPreparation and feeding

When should I automate cap feeding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to component bowl feedingPreparation and feeding

When should I automate component bowl feeding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to centrifugal feedingPreparation and feeding

When should I automate centrifugal feeding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to elevator feedingPreparation and feeding

When should I automate elevator feeding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to hopper feedingPreparation and feeding

When should I automate hopper feeding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to vibratory feedingPreparation and feeding

When should I automate vibratory feeding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to component countingPreparation and feeding

When should I automate component counting?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to component sortingPreparation and feeding

When should I automate component sorting?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to container cleaningPreparation and feeding

When should I automate container cleaning?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to line clearancePreparation and feeding

When should I automate line clearance?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Conveyors, automation and lines

20 questions

Production process relating to belt conveyorsConveyors, automation and lines

When should I automate belt conveyors?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to modular conveyorsConveyors, automation and lines

When should I automate modular conveyors?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to roller conveyorsConveyors, automation and lines

When should I automate roller conveyors?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to incline conveyorsConveyors, automation and lines

When should I automate incline conveyors?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to curved conveyorsConveyors, automation and lines

When should I automate curved conveyors?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to accumulation conveyorsConveyors, automation and lines

When should I automate accumulation conveyors?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to air conveyorsConveyors, automation and lines

When should I automate air conveyors?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to transfer platesConveyors, automation and lines

When should I automate transfer plates?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to indexing conveyorsConveyors, automation and lines

When should I automate indexing conveyors?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to line controlsConveyors, automation and lines

When should I automate line controls?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to machine integrationConveyors, automation and lines

When should I automate machine integration?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to filling capping and labelling linesConveyors, automation and lines

When should I automate filling capping and labelling lines?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to robotic pick and placeConveyors, automation and lines

When should I automate robotic pick and place?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to robotic packingConveyors, automation and lines

When should I automate robotic packing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to robotic palletisingConveyors, automation and lines

When should I automate robotic palletising?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to collaborative robot applicationsConveyors, automation and lines

When should I automate collaborative robot applications?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to vision inspectionConveyors, automation and lines

When should I automate vision inspection?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to data integrationConveyors, automation and lines

When should I automate data integration?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to production monitoringConveyors, automation and lines

When should I automate production monitoring?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to machine safety guardingConveyors, automation and lines

When should I automate machine safety guarding?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Packaging materials and formats

15 questions

Production process relating to glass bottlesPackaging materials and formats

When should I automate glass bottles?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to pet bottlesPackaging materials and formats

When should I automate pet bottles?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to hdpe bottlesPackaging materials and formats

When should I automate hdpe bottles?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to aluminium bottlesPackaging materials and formats

When should I automate aluminium bottles?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to jarsPackaging materials and formats

When should I automate jars?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to tubsPackaging materials and formats

When should I automate tubs?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to cansPackaging materials and formats

When should I automate cans?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to tubes and cartridgesPackaging materials and formats

When should I automate tubes and cartridges?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to jerrycansPackaging materials and formats

When should I automate jerrycans?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to drumsPackaging materials and formats

When should I automate drums?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to cartonsPackaging materials and formats

When should I automate cartons?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to casesPackaging materials and formats

When should I automate cases?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to labels and adhesivesPackaging materials and formats

When should I automate labels and adhesives?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to flexible filmsPackaging materials and formats

When should I automate flexible films?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to recyclable packagingPackaging materials and formats

When should I automate recyclable packaging?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Industries and operating models

13 questions

Production process relating to food productionIndustries and operating models

When should I automate food production?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to beverage productionIndustries and operating models

When should I automate beverage production?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to brewing and ciderIndustries and operating models

When should I automate brewing and cider?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to wine and spiritsIndustries and operating models

When should I automate wine and spirits?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to dairy productionIndustries and operating models

When should I automate dairy production?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to cosmetics and skincareIndustries and operating models

When should I automate cosmetics and skincare?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to personal careIndustries and operating models

When should I automate personal care?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to pharmaceutical and medical productionIndustries and operating models

When should I automate pharmaceutical and medical production?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to nutraceutical productionIndustries and operating models

When should I automate nutraceutical production?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to household chemical productionIndustries and operating models

When should I automate household chemical production?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to industrial chemical productionIndustries and operating models

When should I automate industrial chemical production?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to contract packingIndustries and operating models

When should I automate contract packing?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Production process relating to fulfilment and e-commerceIndustries and operating models

When should I automate fulfilment and e-commerce?

Automate when the current constraint, labour requirement, quality risk or capacity need can be measured and the automated process can be supported reliably.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What information should I provide about automation?
Provide the product, pack, smallest and largest format, current and required output, clear pass/fail targets, site utilities and a short video or samples.
Should automation be tested before ordering?
Yes. Test representative product and packaging, including the hardest normal condition, and agree clear pass/fail results before ordering.
Should I compare maximum speed or sustained output?
Compare the number of acceptable finished packs produced in a normal hour, including loading, replenishment, changeover and inspection. A short peak-speed test does not show normal production output.
What causes most production problems?
The most common causes are unstable product or packaging conditions, poor presentation, unsuitable settings, wear, insufficient buffer capacity and unclear acceptance limits.
When should I contact Lancing?
Contact Lancing when the product, pack and target are defined or when measurements and video show a recurring constraint that cannot be resolved safely by normal setup and maintenance.