SPSolve ProductionPractical production help from Lancing UK
scaling production

How do I scale case taping from manual to automatic production?

Scale the dominant constraint first and retain enough flexibility for normal product, pack and demand variation.

Recommended machinery for this problem
casetapers.co.uk
View suitable machinery at casetapers.co.uk →

Direct answer

Scale the dominant constraint first and retain enough flexibility for normal product, pack and demand variation. For case taping, confirm the result with representative product and packaging before altering several variables at once.

Likely causes

  • Growth assumptions are not connected to measured demand in the case taping process.
  • A full line is chosen before the product range stabilises in the case taping process.
  • The next bottleneck is ignored in the case taping process.
  • Utilities and space cannot support the target in the case taping process.

What should be checked first?

  • Measure the current operation
  • Forecast low, expected and high demand
  • Identify the first capacity constraint
  • Compare manual, semi-automatic and automatic stages
  • Protect changeover flexibility
  • Plan utilities and layout
  • Set stage-gate acceptance criteria

What should you compare before buying?

Compare the operating principle against the actual product, pack range, sustained good output, measurable quality limits, cleaning, changeover and site conditions. Use representative samples and agree what will be demonstrated during testing before delivery and after installation.

Machinery options for this problem

Start with the first option below. It most closely matches the product, pack and problem described on this page. The other options may suit a wider line or a different level of automation.

casetapers.co.ukView machinery →packagingmachinesuk.co.ukView machinery →automaticpackaginglines.co.ukView machinery →

Related case taping questions

Production process relating to case tapingSealing and end of line

Why is case taping production giving inconsistent results?

Variation usually begins with changing product or packaging conditions, unstable presentation, unsuitable settings or wear in the process.

See the checks →
Production process relating to case tapingSealing and end of line

How can I increase case taping production speed?

Increase sustained good output by identifying the actual constraint, separating machine cycle time from handling time and removing the first recurring cause of waiting.

See the checks →
Production process relating to case tapingSealing and end of line

Why does case taping equipment keep jamming or stopping?

Find the first point where control is lost. A downstream alarm is often only the final symptom of poor feeding, transfer, detection or format control.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What should I check first for scaling production in case taping?
Measure the current operation. Forecast low, expected and high demand.
Can settings alone solve scaling production?
Sometimes, but settings should only be changed after product, packaging, presentation, wear and utilities have been checked. Change one controlled condition at a time.
What samples are needed for a case taping machinery trial?
Provide representative product and packaging from normal production, including the hardest size or condition and enough material for setup and sustained testing.
How should performance be accepted?
Use written numerical and visual acceptance limits over a representative run, including output, quality, rejects, interventions and changeover where relevant.
Where can I see machinery for this problem?
Start with casetapers.co.uk. It is the closest match for the product, pack and problem on this page; the other options may suit a wider line or a different production requirement.