SPSolve ProductionPractical production help from Lancing UK
maintenance and reliability

How do I reduce breakdowns in bottle orientation equipment?

Record the initiating fault, not only the final alarm, and convert recurring failures into controlled inspection, replacement and setup standards.

Recommended machinery for this problem
bowlfeeders.co.uk
View suitable machinery at bowlfeeders.co.uk →

Direct answer

Record the initiating fault, not only the final alarm, and convert recurring failures into controlled inspection, replacement and setup standards. For bottle orientation, confirm the result with representative product and packaging before altering several variables at once.

Likely causes

  • Fault history is incomplete in the bottle orientation process.
  • Wear items are replaced only after failure in the bottle orientation process.
  • Settings vary after intervention in the bottle orientation process.
  • The initiating process fault remains in the bottle orientation process.

What should be checked first?

  • Create a time-stamped fault log
  • Identify the first abnormal condition
  • Inspect critical wear and alignment points
  • Set replacement and lubrication intervals
  • Control settings and recipes
  • Verify repairs under representative load
  • Review repeat faults monthly

What should you compare before buying?

Compare the operating principle against the actual product, pack range, sustained good output, measurable quality limits, cleaning, changeover and site conditions. Use representative samples and agree what will be demonstrated during testing before delivery and after installation.

Machinery options for this problem

Start with the first option below. It most closely matches the product, pack and problem described on this page. The other options may suit a wider line or a different level of automation.

bowlfeeders.co.ukView machinery →bottleunscramblers.co.ukView machinery →

Related bottle orientation questions

Production process relating to bottle orientationPreparation and feeding

Why is bottle orientation production giving inconsistent results?

Variation usually begins with changing product or packaging conditions, unstable presentation, unsuitable settings or wear in the process.

See the checks →
Production process relating to bottle orientationPreparation and feeding

How can I increase bottle orientation production speed?

Increase sustained good output by identifying the actual constraint, separating machine cycle time from handling time and removing the first recurring cause of waiting.

See the checks →
Production process relating to bottle orientationPreparation and feeding

Why does bottle orientation equipment keep jamming or stopping?

Find the first point where control is lost. A downstream alarm is often only the final symptom of poor feeding, transfer, detection or format control.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What should I check first for maintenance and reliability in bottle orientation?
Create a time-stamped fault log. Identify the first abnormal condition.
Can settings alone solve maintenance and reliability?
Sometimes, but settings should only be changed after product, packaging, presentation, wear and utilities have been checked. Change one controlled condition at a time.
What samples are needed for a bottle orientation machinery trial?
Provide representative product and packaging from normal production, including the hardest size or condition and enough material for setup and sustained testing.
How should performance be accepted?
Use written numerical and visual acceptance limits over a representative run, including output, quality, rejects, interventions and changeover where relevant.
Where can I see machinery for this problem?
Start with bowlfeeders.co.uk. It is the closest match for the product, pack and problem on this page; the other options may suit a wider line or a different production requirement.