SPSolve ProductionPractical production help from Lancing UK
machine specification

What information is needed to specify stick packs machinery?

A useful specification defines the product, pack, range, sustained output, measurable acceptance, utilities, site constraints and evidence required before delivery.

Recommended machinery for this problem
sachetfillingmachines.co.uk
View suitable machinery at sachetfillingmachines.co.uk →

Direct answer

A useful specification defines the product, pack, range, sustained output, measurable acceptance, utilities, site constraints and evidence required before delivery. For stick packs, confirm the result with representative product and packaging before altering several variables at once.

Likely causes

  • The requirement describes a machine rather than the result in the stick packs process.
  • Products and packs are not fully listed in the stick packs process.
  • Peak speed is used instead of sustained good output in the stick packs process.
  • Acceptance, documentation and site constraints are absent in the stick packs process.

What should be checked first?

  • List products, packs and normal variation
  • Define measurable quality limits
  • Set sustained output and changeover target
  • Provide dimensions, samples and safety data
  • Survey space, access and utilities
  • Define controls, documents and training
  • Agree FAT and SAT tests

What should you compare before buying?

Compare the operating principle against the actual product, pack range, sustained good output, measurable quality limits, cleaning, changeover and site conditions. Use representative samples and agree what will be demonstrated during testing before delivery and after installation.

Machinery options for this problem

Start with the first option below. It most closely matches the product, pack and problem described on this page. The other options may suit a wider line or a different level of automation.

sachetfillingmachines.co.ukView machinery →formfillandseal.co.ukView machinery →pouchfillers.co.ukView machinery →

Related stick packs questions

Production process relating to stick packsFlexible packaging

Why is stick packs production giving inconsistent results?

Variation usually begins with changing product or packaging conditions, unstable presentation, unsuitable settings or wear in the process.

See the checks →
Production process relating to stick packsFlexible packaging

How can I increase stick packs production speed?

Increase sustained good output by identifying the actual constraint, separating machine cycle time from handling time and removing the first recurring cause of waiting.

See the checks →
Production process relating to stick packsFlexible packaging

Why does stick packs equipment keep jamming or stopping?

Find the first point where control is lost. A downstream alarm is often only the final symptom of poor feeding, transfer, detection or format control.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What should I check first for machine specification in stick packs?
List products, packs and normal variation. Define measurable quality limits.
Can settings alone solve machine specification?
Sometimes, but settings should only be changed after product, packaging, presentation, wear and utilities have been checked. Change one controlled condition at a time.
What samples are needed for a stick packs machinery trial?
Provide representative product and packaging from normal production, including the hardest size or condition and enough material for setup and sustained testing.
How should performance be accepted?
Use written numerical and visual acceptance limits over a representative run, including output, quality, rejects, interventions and changeover where relevant.
Where can I see machinery for this problem?
Start with sachetfillingmachines.co.uk. It is the closest match for the product, pack and problem on this page; the other options may suit a wider line or a different production requirement.