SPSolve ProductionPractical production help from Lancing UK
compatibility

How do I check product and packaging compatibility for labels and adhesives?

Compatibility must be proven across product contact, storage, temperature, pressure, sealing, labelling, handling and the normal range of supplier variation.

Recommended machinery for this problem
pastefillers.co.uk
View suitable machinery at pastefillers.co.uk →

Direct answer

Compatibility must be proven across product contact, storage, temperature, pressure, sealing, labelling, handling and the normal range of supplier variation. For labels and adhesives, confirm the result with representative product and packaging before altering several variables at once.

Likely causes

  • Product attacks seals, hoses, liners or adhesives in the labels and adhesives process.
  • Temperature or storage changes pack performance in the labels and adhesives process.
  • The pack is dimensionally compatible but mechanically unstable in the labels and adhesives process.
  • Trials do not represent production variation in the labels and adhesives process.

What should be checked first?

  • Obtain current technical and safety data
  • List every product-contact material
  • Test minimum and maximum temperatures
  • Check sealing, torque, label and transport behaviour
  • Use more than one material batch
  • Run the actual production process
  • Document approved combinations and limits

What should you compare before buying?

Compare the operating principle against the actual product, pack range, sustained good output, measurable quality limits, cleaning, changeover and site conditions. Use representative samples and agree what will be demonstrated during testing before delivery and after installation.

Machinery options for this problem

Start with the first option below. It most closely matches the product, pack and problem described on this page. The other options may suit a wider line or a different level of automation.

pastefillers.co.ukView machinery →stockpack.co.ukView machinery →environmentalpackaging.co.ukView machinery →

Related labels and adhesives questions

Production process relating to labels and adhesivesPackaging materials and formats

Why is labels and adhesives production giving inconsistent results?

Variation usually begins with changing product or packaging conditions, unstable presentation, unsuitable settings or wear in the process.

See the checks →
Production process relating to labels and adhesivesPackaging materials and formats

How can I increase labels and adhesives production speed?

Increase sustained good output by identifying the actual constraint, separating machine cycle time from handling time and removing the first recurring cause of waiting.

See the checks →
Production process relating to labels and adhesivesPackaging materials and formats

Why does labels and adhesives equipment keep jamming or stopping?

Find the first point where control is lost. A downstream alarm is often only the final symptom of poor feeding, transfer, detection or format control.

See the checks →
Questions customers also ask

Useful questions before you compare machinery

Use the questions below to prepare the information needed for a useful recommendation.

What should I check first for compatibility in labels and adhesives?
Obtain current technical and safety data. List every product-contact material.
Can settings alone solve compatibility?
Sometimes, but settings should only be changed after product, packaging, presentation, wear and utilities have been checked. Change one controlled condition at a time.
What samples are needed for a labels and adhesives machinery trial?
Provide representative product and packaging from normal production, including the hardest size or condition and enough material for setup and sustained testing.
How should performance be accepted?
Use written numerical and visual acceptance limits over a representative run, including output, quality, rejects, interventions and changeover where relevant.
Where can I see machinery for this problem?
Start with pastefillers.co.uk. It is the closest match for the product, pack and problem on this page; the other options may suit a wider line or a different production requirement.